Hello friends!!!!!!!!
Before we speak about programming on Atmega 16 let’s get familiar with
ATMEGA16 Microcontroller Development Board.
It is made from double sided PTH*
PCB board which supports 5 to 12 v of dc/ac supply.
*PTH means (plated thru holes),
the track on opposite faces of the PCB are connected by copper track, for non
PTH, you have to use wire link through the circuit. So check for PTH boards when you buy.
Block Diagram:
Board Description:
Getting Started:
The Board can source power to the microcontroller through the USB cable.
Remember that the power available through the USB cable is limited. If
your
Application attaches several peripherals to the board, you should use an
external
Power source connected to the DC input socket on Board. The external
power
Supply should be 9-12V DC with positive center connector. The red POWER
LED
Will glow when power is on.
Fine ! Now i hope you have got a rough idea of what is going all around.So It's time for testing.
thanks
No comments:
Post a Comment